Website Terms of Use

1. Terms

By accessing this website, you acknowledge that you are bound by this Website’s Terms of Use, all applicable laws and regulations, and your compliance with all applicable local laws. If you do not accept anything on these terms, please stop visiting the site. The materials contained in this website are protected by applicable copyright and trademark law.

2. Use License

The material (information or software) contained on our website may only be used temporarily for non-commercial personal purposes. The use of this information for the following purposes is prohibited:

· Copying or modifying materials,

· Use the Materials for any commercial purpose or for any public display (commercial or non-commercial)

· Using any software or information contained in the Flapcon web site with reverse engineering methods,

· To use the materials in the website on another server or in any medium, to share information

This license will automatically terminate if you violate any of these restrictions. This license may be terminated at any time by the flapcon.

This license will automatically terminate if you breach any of these restrictions and terminate it at any time by Bray International. Upon termination of the review of these materials or the termination of this license, you must destroy the downloaded materials in your electronic or printed format. After you finish reviewing these materials or after the termination of this license, you must destroy all downloaded materials under your hand in electronic or printed format.

3. Disclaimer

The materials contained in the FLAPCON website are provided “as is”.

FLAPCON does not provide any warranty, express or implied. Flapcon disclaims any and all other warranties and infringements of any other intellectual property rights or other rights violations, including but not limited to the implied warranties or conditions of merchantability, certain fitness for purpose and other emblem conditions.

In addition, FLAPCON does not make any representations or warranties about the validity, possible outcomes or reliability of the internet website or any internet related or other materials related to this site or materials.

4. Limitations

Flapcon or its suppliers will in no way be liable for any damages arising out of the ability to use or use the materials contained in Flapcon’s website (including, without limitation, loss of data or loss of profits or loss of business due to business interruption) Even if the possibility of such damage is reported verbally or in writing to the authorized representatives of Flapcon; will not be held responsible for any damage or injury that may occur.

5. Corrections and Printing Errors

The materials appearing on Flapcon’s website may contain technical, typographical or photographic errors. Flapcon does not guarantee that any material on the website is accurate, complete or up-to-date. Flapcon may change the materials on its website at any time without prior notice. Flapcon makes no commitment to update the materials.

6. Site Usage Terms Changes

Flapcon may change these terms of use for web sites at any time without notice. By using this website, you agree to be bound by the current version of these Terms of Use and Terms of Use.

7-Other Connections & Cookies

The Flapcon Web Site may contain links to other websites. Whether or not the administrators of these sites are in compliance with the data protection requirements, Flapcon Vana ve Otomasyon Sistemleri San. Tic. Ltd. Sti. does not accept any responsibility.

When you visit our site, some information that is called a cookie can be stored on your computer. If you visit www.Flapcon.com again, these cookies can be read for information. As a result of accepting a cookie from you, the type of information we collect is specific to your PC and includes your IP address, the date and time of your visit to the PC’s website, which parts of our website were visited, and whether or not the web pages you requested were successfully provided to you. This information is anonymous and belongs to the computer, not to the person.

Cookies are used to get more information about your website usage and to see if your website is working at an optimal level. This makes it possible for us to improve the web services we provide to you and to offer you more extensive experience. You can delete or prevent this information by changing your computer’s settings. If you delete this information or engage others, you may not be able to take advantage of some features of the site.

8. Legal Terms
Disagreements about website usage license is subject to the laws of the Republic of Turkey.

Warranty

FLAPCON LTD. LIMITED WARRANTY

Applicable to FLAPCON LTD. Specialty Valve Products Only

FLAPCON LTD. warrants each FLAPCON® specialty valve products to be free from defects in materials and workmanship under normal use and service for a period of two (2) years from date of purchase.

In the event any defect occurs which the owner believes is covered by this warranty, the owner should immediately contact.

FLAPCON Technical Services, either in writing or by telephone at +90 216 660 10 26. The owner will be instructed to return said valve, at the owner’s expense, to FLAPCON LTD., or an authorized representative for inspection. In the event said inspection discloses to the satisfaction of FLAPCON LTD. that said valve is defective, a replacement shall be mailed free of charge to the owner, and FLAPCON LTD.

TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY SPECIFICALLY EXCLUDES INCIDENTAL AND CONSEQUENTIAL DAMAGES OF EVERY TYPE AND DESCRIPTION RESULTING FROM ANY CLAIMED DEFECT IN MATERIAL OR WORKMANSHIP, INCLUDING BUT NOT LIMITED TO, PERSONAL INJURIES AND PROPERTY DAMAGES.

Some states or countries do not allow the exclusion or limitation of incidental or consequential damages so these limitations may not apply to you.

TO THE EXTENT PERMITTED BY LAW, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country to country.
State quantity, figure number and size for each valve or fitting you wish to order. See individual catalog pages for specific or special product designations.

HOW MANY TO ORDER
FLAPCON® valves and fittings are decimal packed for your convenience in handling, shipping and stockkeeping. Number in master carton varies with item.

POLICY ON RETURNS TO FACTORY
No FLAPCON valves and fittings are to be returned without prior written agreement. Transportation must be prepaid. A 20% charge will be made to cover cost of rehandling and reinspection.

TECHNICAL ASSISTANCE
Engineers, contractors, wholesalers or manufacturers may obtain special or technical assistance from any factory representative of FLAPCON.
To the best of our knowledge, the information contained in this publication is accurate. However, FLAPCON does not assume any liability whatsoever for the accuracy or completeness of such information. Final determinations of the suitability of any information or product for the use to be contemplated is the sole responsibility of the user. The manner of that use, and whether there is any infringement of patents, is also the sole responsibility of the user.

Sales Terms and Conditions

SELLER INFORMATION

Firm: FLAPCON VALVE AND AUTOMATION SYSTEMS CO. LTD.
Address: KEMAL TURKLER MAH. ONCU SOKAK NO: 4/A SANCAKTEPE ISTANBUL TURKEY
E-mail: post@flapcon.com
Web: www.flapcon.com

BUYER INFORMATIONS
Firm :
Address:
Tax number :
Tax Administration :

 

By acceptance of the goods described herein, the Purchaser expressly acknowledges and agrees as follows:

1. Warranty: The warranty described below applies only to new or unused goods or goods reconditioned by Flapcon Valves® (Seller). The Seller specifically disclaims any warranty for used goods or goods sold as is. For a period of one (1) year after date of purchase of any of the goods described herein, Seller warrants such goods shall remain free from failure due to defects in workmanship and materials incorpo-rated therein by or for Seller provided such failure shall not have been caused or contributed to by improper usage, service or application, im-proper installation or maintenance, repairs, alterations, or modifications effected by or for the user, misuse, negligence or accident. In the event of failure for which Seller has assumed warranty obligations hereunder, and provided written notification of such failure shall be immediately given to Seller, it agrees to repair, or at its option, to replace the goods sold at its sold expense. Apart from the warranty and undertaking above set forth, or unless otherwise specifically consented to in writing by Seller, Seller assumes no obligation or liability for losses, expense or damages, direct or consequential, suffered or incurred as a result of any failure of, or defect in, the goods described herein, including but not limited to, such costs, expenses or damages as may result of any failure of, or defect in, the goods described herein, including but not limited to, such costs, expenses or damages as may result from the necessity to remove, replace, restore or transport the goods from any location or service in which they may be used, regardless of the cause of such failure or defect. This warranty extends only to the original Purchaser of the goods and is the only warranty made by Seller in connection therewith. There are no other warranties, express or implied, of any kind given with respect to the goods, their merchantability, fitness for any particular purpose or usage, or otherwise, nor is any person authorized to ex-tend on behalf of Seller any form of warranty other than that above set forth. The goods described herein are not sold or distributed by Seller for personal, family or household purposes, nor are they normally suited for use as such.

2. Prices: Prices and other terms of sale where set forth in current price sheets are subject to change without notice. Stenographic or clerical errors are subject to correction.

3. Acceptance of Orders and Special Orders: All orders are subject to acceptance by Seller at its home office, Stafford, Texas, only. No assignment of the Purchaser’s rights may be made without the written consent of the Seller. Orders for special materials are subject to cancellation only upon agreement to make payment for the work performed, material used, and a reasonable profit.

4. Terms, Payment and Partial Shipment: All accounts are payable cash before of invoice date. Eight percent (8%) per month interest charged on accounts after delayed payment, or nintysix percent (96%) annually. All accounts are payable in United States dollars, free of exchange, collection, or any other charges. If in the sole discretion of Seller, the financial condition of the Purchaser at any time so requires, Seller retains the right to require full or partial payment in advance, to set spending limits for credit accounts or to require other adequate assurances of fi-nancial responsibility. Seller reserves the right to make partial shipments from time to time and render invoices therefore, which shall be due and payable as provided in said invoices.

5. Freight Charges: Unless otherwise specifically noted, standard shipping charges (calculated by product weight, not including packaging) shall be added or be in addition to the price quoted and Purchaser agrees to pay the same to Seller.

6. Taxes: Unless otherwise specifically noted, the amount of any sales, use, occupancy, excise tax, or other tax, of any nature, local, for which Seller is legally liable, either initially or through failure of payment by Purchaser, shall be added or be in addition to the price quoted and Purchaser agrees to pay the same to Seller.

7. Unavoidable Conditions: Seller shall not be liable for failure to deliver or delays in delivery occasioned by causes beyond its con-trol, including, without limitation, strikes, lockouts, fires, embargoes, war or other outbreaks of hostilities, acts of God, inability to obtain ship-ping space, machinery, breakdowns, delays of carriers or suppliers, and governmental acts or regulations.

8. Returns and Cancellations: No product may be returned without Seller’s prior written consent. All goods returned are subject to a han-dling charge plus freight in both directions, restocking fees and charges for any required reconditioning, unless otherwise specified in writing by Seller. Overages, shortages and incorrect material claims must be made in writing within ten (10) days of receipt of goods. Cancellation of orders once placed with and accepted by Seller may be made only with its written consent.

9. No Waiver: Seller’s failure to insist upon any of the terms, covenants, or conditions listed herein or to exercise any right hereunder shall not be construed as a waiver or relinquishment of the future performances of any such term, covenant or condition, or the future exercise of such right or a waiver or relinquishment or waiver of any other term, covenant or condition or the exercise of any other rights hereunder.

10. Drawings, Data and Confidential Information: The weights, dimensions, capacities, prices, performance ratings and other data included in catalogues, prospectuses, circulars, advertisements, illustrated matter and price lists constitute a guide. These data shall not be binding except to the extent that they are by reference expressly included in the purchase order. Any drawings or technical documents intend-ed for use in the manufacture of machinery, equipment, plants, parts, or other material and any ancillary services associated therewith (Material), or a part thereof, and submitted to the Purchaser prior or subsequent to the formation of the purchase order, remain the exclusive property of the Seller. They shall not, without the Seller’s consent, be utilized by the Purchaser or copied, reproduced, transmitted or communi-cated to an unauthorized third party, provided, however, that the said plans and documents shall be the property of the Purchaser if it is ex-pressly so agreed in writing. Any drawings or technical documents intended for use in the construction of the Material or of part thereof and submitted to the Seller by the Purchaser prior or subsequent to the formation of the purchase order remain the exclusive property of the Pur-chaser. They shall not, without Purchaser’s consent in writing, be utilized by the Seller or copied, reproduced, transmitted or communicated to an unauthorized third party.

11. Governing Law: This contract shall be governed by, construed and enforced in accordance with the laws of the State of Turkey.

12. Totality of Agreement, Special Provisions, Modifications: This instrument constitutes the entire agreement of the parties with respect to all matters and things herein mentioned. Purchaser warrants, represents and agrees that it has inspected the goods and otherwise made inquiry and review, upon its own behalf, concerning the nature, characteristics and quality of the materials and workmanship incorpo-rated therein at or prior to delivery, that it is fully contented and satisfied therewith and has independently determined that the goods are in all respects fit and usable for all purposes for which they are intended to be employed by Purchaser. It is expressly acknowledged and agreed by and between the parties that neither party has, nor is now, relying upon any collateral, prior or contemporaneous agreement, written or oral, assurance or assurances, representation or warranty, of any kind or nature as to or respecting the condition or capabilities of the goods and the other matters and things, rights and responsibilities herein fixed and described. No modification, waiver or discharge of any term or provi-sion of this instrument shall be implied by law, nor shall any alteration, modification or acquittance of any such term or provision be effective for any purpose unless in writing signed by or upon behalf of the party charged therewith. (1) Returns are accepted within 180 days of shipment. Restocking charges for returned standard materials is 20%. Cancellation of orders for standard materials prior to shipment may incur a 20% minimum cancellation charge. Cancellation of non-standard material may incur up to 100% cancellation charge depending on stage of work in progress. All material returned to Flapcon Valves® must be accompanied by a prior written Returned Goods Authorization (RGA) form and freight must be prepaid. All material is subject to inspection and final disposition by Flapcon Valves® quality department. A clean up and or re-certification charge may apply to any returned materials. Special items, buyouts, and modified products are non-returnable. (2) All products are subject to prior sales. (3) All sales are subject to Flapcon Valves® standard Terms & Conditions.

13. Export Regulations: Flapcon Valves® products can only be exported in accordance with TURKEY Export Administration Regulations and other TURKEY legal requirements. Diversion contrary to TURKEY. law is prohibited.